Dataset of 110 kV Circuit Breaker Coil Currents for Condition Monitoring: Normal Operation and Fault Diagnostics 核心 · 已核验

doi:10.5281/zenodo.19109562

This dataset contains coil current signals of a typical 110 kV circuit breaker, designed for fault diagnosis and feature extraction research. The data covers both normal operating conditions and various simulated defects. The measurements were obtained using a specialized coil current emulator, the details of which are documented in the associated publication: Machine Learning-Based High-Voltage Circuit Breaker Defect Classification Utilizing Savitzky–Golay Filter (10.1109/TIM.2025.3604980).

Data Acquisition

Sensor: ACS712 Hall-effect current sensor.

Sampling Frequency: Approximately 6.1 kHz.

Dataset Structure

The dataset is provided in a XLS format where each row represents a single measurement. The first column indicates the operational state or defect type as follows:

Norm: Normal operation of the coil (Baseline).

Aux: Auxiliary contact defect.

Latch: Latch operation/mechanical defect.

VoltRes: Supply voltage defect (Resistive/Voltage drop).

Usage Note

Researchers utilizing this dataset are encouraged to refer to the main paper (DOI listed above) for a detailed explanation of the feature extraction techniques and the physical parameters of the emulator used to generate these signals. These signals are optimized for feature extraction and the development of predictive maintenance algorithms for high-voltage switchgear.

落地页

https://zenodo.org/doi/10.5281/zenodo.19109562

许可证

CC-BY-4.0 (判读置信:inferred)

国内可访问性

国内直连:可达 (2026-07-11 检测) 代理通道:可达 (2026-07-11 检测)
检测口径:lychee 双通道单轮探测;「直连超时」表示检测窗口内未完成,系慢或不稳定证据,不构成封锁证据。

发布年份

2026

发布方

Zenodo

PHM 任务

condition_monitoring fault_diagnosis

故障工况

传感器