VIBRATION DATA IUT DOUALA 核心 · 已核验

mxds5x34jjwnex29

This dataset contains vibration signals collected from a three-phase asynchronous electric motor operating under various health and fault conditions. The data were acquired from an experimental test bench developed at the Electrotechnical Laboratory of the IUT of Douala. Vibration measurements were obtained using a high-sensitivity piezoelectric sensor (approximately 100 mV/g, bandwidth 0.5 Hz–10 kHz) mounted on the motor shaft. The analog signals were digitized using an Arduino Uno microcontroller equipped with a 10-bit analog-to-digital converter (ADC), producing values ranging from 0 to 1023. Data acquisition was performed at a sampling frequency of 5 kHz. The dataset consists of approximately 1.6 million data points distributed across five operating conditions: normal operation and four mechanical fault types (ball fault, ring fault, bearing fault, and shaft fault). Each fault condition is further characterized by two severity levels (“speed 1” and “speed 2”), resulting in nine distinct states. Each condition contributes approximately 200,000 data points. The dataset is structured into four main variables: time (timestamp), vibration signal, fault type, and severity level. For machine learning applications, the data are provided in CSV format and organized into training, validation, and test subsets, ensuring a balanced and representative distribution of all classes. To enhance realism and robustness, Gaussian white noise has been added to the signals, simulating industrial operating environments. The dataset is suitable for applications in fault diagnosis, condition monitoring, and predictive maintenance using machine learning and deep learning techniques.

本卡描述如含来自官方页的原文片段,其版权归原作者,不在本站 CC-BY 4.0 许可范围(见关于与许可)。

落地页
https://dx.doi.org/10.17632/ktmnx5r2th.1
许可证
CC-BY-4.0 (置信:verified_official)
国内可访问性
国内直连:可达 (2026-07-11 检测) 非直连:可达 (2026-07-11 检测)
「直连超时」表示检测窗口内未完成,系慢或不稳定证据,不构成封锁证据。
设备类型
induction_motor
PHM 任务
fault_diagnosis condition_monitoring

故障工况

fault_type: healthy_baseline
fault_type: bearing_rolling_element_fault
description: 裸 bearing fault 与 ring fault(部位未述)fault_type: bearing_fault_unspecified

传感器

sensor_type: accelerometer

运行工况

condition_type: rotating_speed
关联论文(2 篇)

仅表示这篇论文与本数据集在文献网络中相邻, 不代表该论文确实使用了本数据集

溯源(14 条)
来源链接: https://dx.doi.org/10.17632/ktmnx5r2th.1 日期: 2026-07-09
日期: 2026-07-10
日期: 2026-07-10
日期: 2026-07-10
日期: 2026-07-10
日期: 2026-07-10
日期: 2026-07-10
日期: 2026-07-10
日期: 2026-07-11
日期: 2026-07-14
日期: 2026-07-25
日期: 2026-07-26
来源链接: https://data.mendeley.com/public-api/datasets/ktmnx5r2th 日期: 2026-09-02
日期: 2026-09-02