URMA-CRTI dataset for rolling element bearing vibration data 机器收录·待核验

mxdshevbxdenm509

The vibration data of the analyzed bearings in this study are provided by the test bench of the Unit URMM-CRTI ex URMA-CRTI. The test bench consists of a three-phase 0.37 Kw induction motor, a speed drive system, and bearings in different states. The tested bearing supports the drive side motor shaft; three ICP industrial accelerometers (CTC AC 140-2D) with a sensitivity of 100 mV/g are used. A variable speed drive, Lenze ESV371N01SXB is used to control the speed of the AC motor, and the vibration signal is acquired at the following speeds: 30, 35, 40, 45, and 50 Hz. The vibration signal data is analyzed and stored using the VibraQuest software ( VQ-DT8) with a sampling frequency of 25.6 kHz and an acquisition time of 10 s for each operating condition. The considered bearing faults cover the defects of the outer race, the inner race, the rolling ball, and the combined fault.

本卡描述如含来自官方页的原文片段,其版权归原作者,不在本站 CC-BY 4.0 许可范围(见关于与许可)。

落地页

https://zenodo.org/records/19109150

许可证

CC-BY-4.0 (置信:verified_official)

发布年份

2026

发布方

Zenodo

分发点