The multi sensor-based machining signal fusion to compare the relative efficacy of machine learning based tool wear models 核心 · 已核验

mxdssq80n1a3gc11

This dataset contains a force dynamometer, accelerometer sensor, acoustic emission sensor, and tool wear values for different milling conditions. For each condition, 12 experiments were conducted. Tool 1 (T1) to Tool 4 (T4) were used to develop the machine learning models and is validated with Tool 5 (T5) to Tool 8 (T8) respectively. This dataset contains raw data taken from each sensor output for each experimental cut. From this dataset, the relative efficacy of machine learning-based tool wear models was developed. Also, two sensor combination was used to compare the sensor effectiveness in tool wear prediction. The dataset shared here is part of the research work published in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

本卡描述如含来自官方页的原文片段,其版权归原作者,不在本站 CC-BY 4.0 许可范围(见关于与许可)。

落地页

https://doi.org/10.7910/DVN/7IAJWU

许可证

CC-BY-NC-4.0 (置信:verified_official)

国内可访问性

国内直连:可达 (2026-07-11 检测) 非直连:可达 (2026-07-11 检测)
「直连超时」表示检测窗口内未完成,系慢或不稳定证据,不构成封锁证据。

发布年份

2022

设备类型

machine_tool

分发点

故障工况

传感器