Study of Electrical Resistance Method for Lubrication Condition Monitoring of Oil and Grease Lubricated Point Contacts 核心 · 已核验

mxdszwgp9cssg508

In high-end equipment and precise mechanical systems, accurate monitoring of the lubrication status of tribological interfaces is critical to maintaining reliable mechanical performance, extending service life, and improving productivity. However, there are still many challenges in the real-time monitoring and evaluation of lubrication status for metallic contacts under real operating conditions. An equivalent contact resistance measurement system was developed in this work to realize the real-time condition monitoring by extraction of the electrical signal in the lubrication area of a metallic ball-disc tribo-pair. By adjusting the resistance of the balance resistor and the applied voltage in the developed circuit, the voltage gained by the lubricated contact can be controlled, and the transition of the lubrication regimes can be captured. At the same time, combined with optical interference technology and synchronous monitoring of the changes in friction, a multi-parameter evaluation system for determining the lubrication status was built. The relation among contact resistance, film thickness, and friction was explored at different entrainment velocities. Results show that the developed contact resistance method can effectively reflect the lubrication regimes of the contact zone, as well as the dynamic evolution of lubrication status. Subsequently, the developed electrical resistance method was applied to the condition monitoring of grease lubricated point contacts. In the process of continuous monitoring of the evolution of the electrical signal over time, the lubrication regime of grease lubrication varies, and the critical point of parched lubrication and the rupture of the lubricating film were effectively captured. The experimental results of both oil and grease preliminarily verified the reliability of the developed electrical resistance method, which can provide a solution for the lubrication condition monitoring of mechanical systems (such as bearings and gears) in engineering by taking essential insulation measures.

本卡描述如含来自官方页的原文片段,其版权归原作者,不在本站 CC-BY 4.0 许可范围(见关于与许可)。

落地页

https://doi.org/10.57760/sciencedb.39307

许可证

CC-BY-NC-ND-4.0 (置信:verified_official)

国内可访问性

国内直连:可达 (2026-07-11 检测) 非直连:可达 (2026-07-11 检测)
「直连超时」表示检测窗口内未完成,系慢或不稳定证据,不构成封锁证据。

PHM 任务

condition_monitoring

运行工况